A reinforced concrete column is a structural member designed to carry compressive loads, composed of concrete with an embedded steel frame to provide ...

Reinforced concrete beams are structural elements that designed to carry transverse external loads. The loads cause bending moment, shear forces and in some ...

A column, in general, may be defined as a member carrying direct axial load which causes compressive stresses of such magnitude that these stresses largely ...

The moment magnification procedure was a replacement for the reduction factor method contained in the previous 1963 version of ACI 318. In ACI 318-63, ...

A single tension-loaded chemical fastener with M18 threaded rod is embedded in 32 MPa cracked concrete, 200 mm thick slab. The fastener has an effective ...

Flexural - Flexural strength is the ability of a material to with stand bending forces perpendicular to its longitudinal axis. The resulting stress are a ...

In general, it is an upright support for a structure or superstructure, but it can also refer to the sections of load-bearing structural walls between ...

A two-way slab is a slab that is supported on all its four sides by beams. The supports carry the loads along both directions of the slab. Hence, it ...

When building with tilt-up, the site is prepared, walls are cast on-site on the floor slab, and then tilted up and secured in place. ... Wall panels are often ...

Anchorage or fastenings in concrete construction refers to the means to connect a structural or non-structural component to a concrete structure. ... The ...