The design of axially loaded circular columns is mainly governed by the column's cross-section and its material properties. This is because the load acts at ...

Beam Penetration Method : In this, different colors of multi-layered are coated on inner surface of screen, normally the two layers of phosphorus i.e., red ...

Anchor reinforcement consists of longitudinal rebar and ties to carry anchor tension forces and shear forces, respectively. The Strut-and-Tie Model is ...

The Column Base Plate connection is a rectangular steel plate welded to the bottom of a steel column. The steel plate sits on the top of a concrete support ...

Plate elements are three- or four-node elements formulated in three-dimensional space. These elements are used to model heat transfer in thin plate/shell type ...

The main attributes of concrete pipe apply to sanitary, storm sewers and culverts. Many attributes also may be applied to box sections used for storm ...

A development length can be defined as the amount of reinforcement(bar) length needed to be embedded or projected into the column to establish the desired ...

Reinforced concrete is used for construction on a large scale, such as bridges, dams, piers, tall buildings and stadiums. It is most commonly used in domestic ...

The design moment resistance of the base plate depends on the resistances of two T-stubs, one for each flange of the column. Whether each T-stub is in ...

Base plate in compression. The resistance of concrete in compression is defined according to EN 1993-1-1 by the following formula. A temporary form ...