Estimate the total capacity and filled volumes in gallons and liters of tanks such as oil tanks and water tanks. Assumes inside dimensions of the tank. ...

The ring beam/wall is designed for hoop tension force created due to soil and surcharge pressures and the torsional moment due to the various load ...

Factors to consider when designing a staircase All the steps on the same flight must be identical.Any stairway that has more than 15 steps have to ...

The design concept of waffle slabs is similar to that of ribbed slabs, with the difference being that waffle slabs have ribs spanning in both directions, and ...

The two-way flat plate slab is simply a slab of uniform thickness directly supported on columns, and it is generally suitable for relatively light loads. ... ...

A slab is a structural element, made of concrete, that is used to create flat horizontal surfaces such as floors, roof decks and ceilings. A slab is generally ...

The direct design method (DDM) ACI Code 8.10 is an approximate procedure for the analysis and design of two-way slabs. It is limited to slab systems subjected ...

DDM is very simplest and approximate method for analysis of flat slab. In this method total moment (M0) is calculated and then it distributed to total ...

Concrete Floor Slab Construction Process Assemble and Erect Formwork for Slab.Prepare and Place Reinforcement for Slab.Pour, Compact and Finishing Concrete ...

The construction of a floor slab is done in five steps: The founding (shallow foundation / deep foundation) Depending on the subsoil, the first decision is ...