Excel Sheets

Civil Books Platform

Design for Bending Post at Top of Wall, Based on ACI 530-05 & UBC 97

Bending is one of the most common sheet metal fabrication operations. Also known as press braking, flanging, die bending, folding and edging, this ...

Design of Masonry Bearing Wall with Opening Based on ACI 530-05

A load-bearing wall, (sometimes referred to as a 'bearing wall'), is a wall that supports vertical load in addition to its own weight and is an ...

Beam to Wall Anchorage Design Based on ACI 530 / IBC 06 & CBC 07

Beam to Wall Anchorage Design The testing consisted of specimens with closed tie anchor reinforcement, non-closed u-stirrups and control specimens ...

Fastener Anchorage in Combined Stresses Based on ACI 530 / IBC 06 & CBC 07

An anchor bolt is a used type of fastener that's designed to connect one or more objects to a concrete surface. With concrete being brittle, ...

X Braced Frame Analysis using Finite Element Method

Steel X braces are used extensively to retrofit RC frames. When steel braces are added to an existing RC frame, the load paths through which the ...

Wind Analysis for Enclosed Building, Based on DSA IR 16-7 (SEAOC)

Wind load is the load, in pounds per square foot, placed on the exterior of a structure by wind. ... The angle at which the wind strikes the ...

Wind Girt Deflection Analysis of Wood, Metal Stud, and/or Steel Tube

In architecture or structural engineering, a girt, also known as a sheeting rail, is a horizontal structural member in a framed wall. Girts provide ...

Wind Analysis for Low-rise Building, Based on ASCE 7-05 / IBC 2006 / CBC 2007

Wind analysis can include but is not limited to evaluating comfort, wind loading on structures, as well as pollution, and natural ventilation. ...

Lateral Force for One-Story Wall Based on IBC 2006

Lateral loads are live loads that are applied parallel to the ground; that is, they are horizontal forces acting on a structure. They are ...

Lateral Force for One-Story Wall Based on CBC 2007

Lateral loads are live loads that are applied parallel to the ground; that is, they are horizontal forces acting on a structure. They are different ...

Two Story Moment Frame Analysis using Finite Element Method

Two-dimensional finite elements are widely used in finite element analysis and using them is generally easy and fast. For mechanical systems that ...

Snow Load Analysis Based on ASCE 7-05 / IBC 2006

Snow load is the downward force on a building's roof by the weight of accumulated snow and ice. The roof or the entire structure can fail if the ...

Excel Sheets
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0