Excel Sheets

Civil Books Platform

Mechanical Equipment Anchorage to Wood Roof Based on NDS 1997

Mechanical Equipment Anchorage to Wood Roof, most often made of cedar, pressure-treated pine, redwood, or cypress, come in two main types: shingles ...

Mechanical Anchorage to Light Wt Concrete Based on CBC 2001 Chapter A

Lightweight concrete is a mixture made with lightweight coarse aggregates such as shale, clay, or slate, which give it its characteristic low ...

Shear Friction Reinforcing Design Based on ACI 318-02

The shear friction concept assumed that such a crack is formed when concrete will be cast at different times and that reinforcement is provided ...

Splice of Reinforcement Based on ACI 318-02

A lap splice is the most common method of creating a single structural entity from two rebar segments. The lap splice, as the name suggests, ...

Coupling Beam Design Based on CBC 2001 / UBC 1997

Coupling beams are beams typically added to a structure to improve its lateral force resistance. They bridge two separate, independent items ...

Corbel Design Based on CBC 01 / ACI 318-95

A corbel is a short cantilever projecting out from a column, a wall, or the side of a beam. A corbel is designed to support another member, usually ...

Concrete Column Design Based on ACI 318-02

A reinforced concrete column is a structural member designed to carry compressive loads, composed of concrete with an embedded steel frame to ...

Concrete Beam Design Based on ACI 318-02

Reinforced concrete beams are structural elements that designed to carry transverse external loads. The loads cause bending moment, shear forces and ...

Design of Column Supporting Discontinuous System Based on IBC 2003 / CBC 2001

A column, in general, may be defined as a member carrying direct axial load which causes compressive stresses of such magnitude that these stresses ...

Magnified Moment Calculation for Circular Column Based on ACI 318-02

The moment magnification procedure was a replacement for the reduction factor method contained in the previous 1963 version of ACI 318. In ACI ...

Single Tension Fastener Away from Edges Based on ACI 318-02

A single tension-loaded chemical fastener with M18 threaded rod is embedded in 32 MPa cracked concrete, 200 mm thick slab. The fastener has an ...

Flexural and Shear Design for Beams According to ACI -318

Flexural - Flexural strength is the ability of a material to with stand bending forces perpendicular to its longitudinal axis. The resulting stress ...

Excel Sheets
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0