![Design for Girder at Masonry Wall Based on ACI 530-05 1 Design for Girder at Masonry Wall Based on ACI 530 05](https://excel.civilmdc.com/wp-content/uploads/2021/12/Design-for-Girder-at-Masonry-Wall-Based-on-ACI-530-05.png)
Masonry walls are the most durable part of any building or structure. Masonry is the word utilized for development with mortar as a coupling material with singular units of blocks, stones, marbles, rocks, solid squares, tiles, and so forth. Mortar is a blend of restricting material with sand.
Beams, girders or other concentrated loads supported by a wall or column shall have a bearing of not less than 3 inches (76 mm) in length measured parallel to the beam on solid masonry not less than 4 inches (102 mm) in thickness, or on a metal bearing plate of adequate design and dimensions to distribute the load